FLC2000 Replacement Flat Screens: Compatibility and Selection Guide

To select a compatible FLC2000 replacement flat screen, confirm the shaker’s exact model and screen-retention design, then match the panel dimensions, installation features, and separation requirement. The “FLC2000” name alone is not enough to establish fit: equipment configurations and replacement-screen specifications can vary, so verify them against the screen currently installed or the manufacturer’s documentation. At Yuanpeng, we recommend checking fit and screening requirements separately before requesting a quotation. This helps reduce the risk of ordering a panel that has the right mesh but does not seat correctly, or one that fits but does not perform as intended.

Check now

Key Takeaways

• Confirm the equipment identification and screen-retention system before ordering.
• Compare the existing panel’s length, width, thickness, edge profile, and installation features with the proposed replacement.
• Specify the required mesh or opening, application, and operating conditions; do not rely on a mesh count alone.
• Ask suppliers to confirm dimensions, material options, minimum order quantity, and lead time in writing.

Who This Guide Is For

This guide is for drilling contractors, mud-system teams, distributors, and procurement professionals sourcing replacement flat screens for equipment identified as FLC2000. It is also useful when a buyer has a screen on hand but lacks a complete drawing or specification sheet. The guidance focuses on practical checks to complete before placing a purchase order. It does not assume that every FLC2000 shaker uses the same screen configuration.

Understanding FLC2000 Screen Compatibility

Fit and screening performance are separate checks

A replacement screen must fit the shaker deck and retention mechanism, and it must also meet the process requirement. Fit depends on details such as panel dimensions, support contact, edge construction, and how the screen is secured. Screening performance depends on factors including mesh opening, wire configuration, fluid properties, and the condition of the screen during operation. Treat these as two related but distinct parts of the selection process.

Screen terminology can be inconsistent between equipment references and suppliers. Buyers may see descriptions such as flat screen, flat panel, or a model-related replacement designation, but these labels do not independently confirm interchangeability. When possible, use the shaker nameplate, a parts list, the installed screen, and clear photographs to establish the exact configuration. If those sources disagree, resolve the difference with the equipment provider or screen supplier before ordering.

Types, Materials, and Specification Details

Panel construction and materials

Replacement screens commonly use a screen cloth supported by a frame or backing structure, but construction details vary by design. The appropriate frame and edge arrangement must match the shaker’s installation system and service conditions. Screen cloth material and construction should be selected with the fluid, solids, and operating environment in mind. Ask the supplier to identify the offered construction rather than assuming that a similar-looking panel uses the same materials.

Mesh and separation requirements

Mesh count is not a complete description of screening performance because wire diameter and opening geometry also influence the effective aperture. Where separation requirements matter, ask for the supplier’s stated opening or cut-point information and clarify how it is defined. Record the target opening in micrometres (µm) where that information is available, alongside the mesh designation. If you are replacing a known screen, provide its label or specification and ask the supplier to confirm the proposed equivalent in writing.

Dimensions and installation features

Measure the existing panel’s length and width in millimetres (mm), and record thickness, edge shape, and any locating or fastening features. As a practical inspection approach, take length and width measurements to the nearest 1 mm and compare them with a drawing or confirmed supplier specification. Also inspect the supporting surface and retention points for wear or damage, since a worn deck can affect installation even when the replacement panel dimensions are correct. Do not alter a panel or retention system to compensate for uncertain compatibility without qualified technical review.

Yuanpeng are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

How to Match a Screen to the Application

Begin with the material being processed and the outcome the operation needs. Relevant information may include the fluid type, solids characteristics, expected operating conditions, and whether the priority is a particular separation target, stable operation, or a balance between the two. Share these details with the supplier instead of requesting a screen based only on a mesh number. The supplier can then assess whether the requested construction and opening are appropriate for the stated use.

1. Identify the equipment: Record the model designation and any available serial, parts, or screen reference information.
2. Document the installed panel: Measure its dimensions and note the frame, edge, and retention features.
3. Define the process requirement: Provide the target mesh or opening, application, and relevant operating conditions.
4. Confirm the proposed match: Ask the supplier to confirm both physical fit and the offered screening specification.
5. Review the quotation: Check quantity, material description, packaging, price basis, and estimated lead time before approval.

Selection Framework for B2B Buyers

Pricing, MOQ, and Lead Time

The price of a replacement screen depends on its dimensions, construction, mesh specification, order quantity, and delivery requirements. Because these variables differ between projects, a current quotation is more reliable than a general price estimate. Minimum order quantity (MOQ) and production lead time should also be confirmed for the specific configuration and destination. Request these terms in calendar days or another clearly defined unit, and ask whether the stated schedule begins after specification approval or order confirmation.

For a new or uncertain specification, some buyers request 1–2 sample panels for an initial fit and process evaluation, if the supplier can offer that quantity. This is a planning option, not a universal requirement, and sample availability may depend on the product and order terms. Confirm whether samples are representative of the quoted production construction and whether their cost or shipping is handled separately. For repeat orders, retain the approved drawing and specification to support consistent reordering.

Supplier Evaluation Checklist

A capable supplier should be willing to discuss both compatibility and application rather than confirming suitability from the model name alone. Ask how the supplier validates dimensions and what information is needed to identify the correct retention style. Request a written quotation that lists the proposed dimensions, mesh or opening specification, construction, quantity, and delivery terms. Clear documentation makes it easier for procurement and maintenance teams to review the order before production.

At Yuanpeng, we support B2B buyers of wire mesh products by reviewing the information provided for a replacement-screen inquiry and clarifying which details are needed for a quotation. Buyers can send equipment identification, measurements, photographs, existing screen markings, required quantity, and destination. Where a specification is incomplete, we recommend resolving the open fit or performance questions before confirming an order. Final compatibility should be confirmed against the buyer’s equipment and approved product specifications.

Common Selection Mistakes to Avoid

• Ordering by model name only: A model designation does not replace verification of dimensions and retention details.
• Choosing by mesh count alone: Ask about opening information and construction, especially when separation requirements are important.
• Ignoring the installed screen’s condition: Wear or damage to the deck and retention points may affect fit and operation.
• Leaving specifications out of the purchase order: Include the approved dimensions, construction, mesh or opening, and quantity.
• Assuming lead time or MOQ: Confirm current terms for the exact configuration and destination.

Conclusion: Confirm Before You Order

The right FLC2000 replacement flat screen is the one whose physical configuration is confirmed for the specific shaker and whose screening specification suits the application. Start by identifying the equipment, measuring the installed panel, and documenting its retention features. Then communicate the target mesh or opening, operating context, quantity, and delivery destination to the supplier. This process gives both parties a clearer basis for evaluating compatibility and preparing an accurate quotation.

To request a quotation from Yuanpeng, prepare the model information, panel measurements in mm, photographs or drawings, existing screen markings, desired screening specification, and order quantity. We can review the supplied details and clarify any information needed to assess the proposed replacement. Confirm the final specification and commercial terms in writing before placing your order.